Euro Mounting Bracket Kit

$20.00 USD

The Euro Mounting Bracket Kit provides a means to install any Euro Foot Activator on cabinets that have either recessed toe kicks or no toe kick at all. This also accommodates any situation where it is desirable to have the Euro activator more visible. This brushed stainless steel bracket is mounted in the gap between the cabinet door and the cabinet floor panel and comes with all necessary stainless steel mounting hardware.

Included with Euro Mounting Bracket Kit:
Brushed stainless steel mounting bracket
Stainless steel mounting hardware

Description

SPECIFICATIONS

Pressure

Operating

0 to 125 psi (862 kpa) maximum

 

Static Burst Rating

700 psi (4,830 kpa) for complete assembly

Flow

Both Valve Blocks

7.2 gpm @ 60 psi (27.01/m @ 4 bar)

Connections – Valve Blocks

Inlet

Integrated 3/8” compression nut “O” ring seal

 

Outlet

Nut and sleeve, 3/8” compression

Filtration

Control Circuit

25 micron

 

Main Port

Greater than .060” (1.5 mm)

Construction

Valve Bodies

Chrome plated brass

 

Seals

Silicone or E.P.D.M.

 

Control Tubing

1/8” O.D. 3 tube bundle (high density polyurethane)

 

Kick Plate (1740 & 1750 Series)

18g #4 brushed stainless steel top, aluminum base

 

Foot Pedal (1760 Series)

18g #4 brushed stainless steel

 

Euro (1770 Series)

Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe

 

Floor Activators (1780 Series)

304 stainless steel laminate, polyurethane buttons, stainless steel hardware

Dimensions

Valve Block (less tube fittings)

2.5” x .88” x 1.25” (6.35 x 2.24 x 3.18 cm)

 

Button Valve Fittings

.63” x .63” x 1.0” (1.60 x 1.60 x 2.54 cm)

 

Kick Plate (1740 & 1750 Series)

8.0”w x 3.42”h x 1.14”d (20.32 x 8.64 x 2.90 cm)

 

Floor Foot Pedal (1760 Series)

7.1”w x 3.0”h x 1.1”d (18 x 7.6 x 2.8 cm)

 

Euro (1770 Series)

1.19”w x 4.92”h x 1.37”d (3.0 x 12.5 x 3.5 cm)

 

Floor Activators (1780 Series)

5.65” diameter disc (14.35 cm)

U.S. Patent Nos. 5505227, 6254057 & 6382585, Canadian Patent No. 2109684, European Patent No. 0654628, International & Other Patents Pending

1 review for Euro Mounting Bracket Kit

  1. Wendell Gregg

    I’ve been browsing online more than three hours today, yet I never found any interesting article like yours. It’s pretty worth enough for me. In my opinion, if all website owners and bloggers made good content as you did, the net will be a lot more useful than ever before.

    http://www.oprolevorter.com/

Add a review

Your email address will not be published.