Kick Plate Model 1750

$383.00 USD

The Model 1750 kick plate activators are a rugged, versatile and stylish way to make any faucet hands-free. Their durable design makes them equally well-suited to commercial, dental and medical settings where ease of use and hygiene is of the utmost concern. The user friendly kick plate activator mounts vertically on the toe kick of your cabinet and the durable kick plate assembly makes it easy to activate your faucet with a light touch of the toe while also giving you the added benefit of locking the activator for continuous flow until the kick plate is tapped again to unlock. By pressing against the vertical portion of the kick plate the water flow is activated until you release it, but simply press down on the top part of the activator and it locks into the “continuous on” position. The locking feature has been intentionally designed to require a deliberate thoughtful motion on the part of the operator to prevent locking inadvertently. This also allows you to use the faucet as you did before you installed the Tapmaster® although we guarantee once you become accustomed to the convenience of your new Tapmaster®, you will rarely want to use your tap the “old way”.
In-line valve blocks are precision machined, chrome plated solid brass, featuring smooth shut off, crossflow prevention, as well as main water flow screening and control circuit filtration.

Technical Specifications (submittal) PDF
Installation Instructions PDF

Description

SPECIFICATIONS

Pressure

Operating

0 to 125 psi (862 kpa) maximum

Static Burst Rating

700 psi (4,830 kpa) for complete assembly

Flow

Both Valve Blocks

7.2 gpm @ 60 psi (27.01/m @ 4 bar)

Connections – Valve Blocks

Inlet

Integrated 3/8” compression nut “O” ring seal

Outlet

Nut and sleeve, 3/8” compression

Filtration

Control Circuit

25 micron

Main Port

Greater than .060” (1.5 mm)

Construction

Valve Bodies

Chrome plated brass

Seals

Silicone or E.P.D.M.

Control Tubing

1/8” O.D. 3 tube bundle (high density polyurethane)

Kick Plate (1740 & 1750 Series)

18g #4 brushed stainless steel top, aluminum base

Foot Pedal (1760 Series)

18g #4 brushed stainless steel

Euro (1770 Series)

Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe

Floor Activators (1780 Series)

304 stainless steel laminate, polyurethane buttons, stainless steel hardware

Dimensions

Valve Block (less tube fittings)

2.5” x .88” x 1.25” (6.35 x 2.24 x 3.18 cm)

Button Valve Fittings

.63” x .63” x 1.0” (1.60 x 1.60 x 2.54 cm)

Kick Plate (1740 & 1750 Series)

8.0”w x 3.42”h x 1.14”d (20.32 x 8.64 x 2.90 cm)

Floor Foot Pedal (1760 Series)

7.1”w x 3.0”h x 1.1”d (18 x 7.6 x 2.8 cm)

Euro (1770 Series)

1.19”w x 4.92”h x 1.37”d (3.0 x 12.5 x 3.5 cm)

Floor Activators (1780 Series)

5.65” diameter disc (14.35 cm)

U.S. Patent Nos. 5505227, 6254057 & 6382585, Canadian Patent No. 2109684, European Patent No. 0654628, International & Other Patents Pending

Reviews

There are no reviews yet.

Be the first to review “Kick Plate Model 1750”

Your email address will not be published.