Kick Plate Model 1751
Combination Kick and Cabinet Door Activator

$495.00 USD

Combine the ease of our cabinet door models with the versatility of our kick pedals.
The Model 1751 gives you the best of both worlds by combining our cabinet door & kick plate activators in one solution by allowing you to use your knee or your foot to activate water flow. This model also allows you to use the kick plate to lock the water flow on when filling large containers or your sink by pressing down on the angled face until it latches. This will provide continuous flow to the faucet until the kick plate is tapped again to unlatch. It should be noted that with the kick plate locked on, your faucet behaves exactly as it did before the Tapmaster® was installed. As one of our most versatile units, it may also be installed in unique situations such as island cabinetry where having the ability to activate the faucet from both sides of the cabinet is important.
In-line valve blocks are precision machined, chrome plated solid brass, featuring smooth shut off, crossflow prevention, as well as main water flow screening and control circuit filtration.

Technical Specifications (submittal) PDF
Technical Specifications (submittal) PDF
Installation Instructions PDF

Description

SPECIFICATIONS

Pressure

Operating

0 to 125 psi (862 kpa) maximum

 

Static Burst Rating

700 psi (4,830 kpa) for complete assembly

Flow

Both Valve Blocks

7.2 gpm @ 60 psi (27.01/m @ 4 bar)

Connections – Valve Blocks

Inlet

Integrated 3/8” compression nut “O” ring seal

 

Outlet

Nut and sleeve, 3/8” compression

Filtration

Control Circuit

25 micron

 

Main Port

Greater than .060” (1.5 mm)

Construction

Valve Bodies

Chrome plated brass

 

Seals

Silicone or E.P.D.M.

 

Control Tubing

1/8” O.D. 3 tube bundle (high density polyurethane)

 

Kick Plate (1740 & 1750 Series)

18g #4 brushed stainless steel top, aluminum base

 

Foot Pedal (1760 Series)

18g #4 brushed stainless steel

 

Euro (1770 Series)

Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe

 

Floor Activators (1780 Series)

304 stainless steel laminate, polyurethane buttons, stainless steel hardware

Dimensions

Valve Block (less tube fittings)

2.5” x .88” x 1.25” (6.35 x 2.24 x 3.18 cm)

 

Button Valve Fittings

.63” x .63” x 1.0” (1.60 x 1.60 x 2.54 cm)

 

Kick Plate (1740 & 1750 Series)

8.0”w x 3.42”h x 1.14”d (20.32 x 8.64 x 2.90 cm)

 

Floor Foot Pedal (1760 Series)

7.1”w x 3.0”h x 1.1”d (18 x 7.6 x 2.8 cm)

 

Euro (1770 Series)

1.19”w x 4.92”h x 1.37”d (3.0 x 12.5 x 3.5 cm)

 

Floor Activators (1780 Series)

5.65” diameter disc (14.35 cm)

U.S. Patent Nos. 5505227, 6254057 & 6382585, Canadian Patent No. 2109684, European Patent No. 0654628, International & Other Patents Pending

Reviews

There are no reviews yet.

Be the first to review “Kick Plate Model 1751
Combination Kick and Cabinet Door Activator”

Your email address will not be published.